How to Replace a Subaru Key Fob
subaru keys made Foresters, Outbacks, and Crosstreks are equipped with a smart feature that allows you to lock your vehicle and leave it somewhere safe. This nifty feature allows you to lock your car and leave it somewhere safe.
You can buy the replacement Subaru remote control from a hardware store or online. However, you should visit the service center at a Subaru dealership for an experience that is more personal.
How to Replace Your Subaru Key Fob
If you have lost your key fob or require to replace the battery, these easy steps can help. First, ensure that you have a new battery (ideally CR2032 3V) available, along with a screwdriver. A spudger could be required to remove the circuit board from the case of the key fob. Before attempting the replacement ensure that you have read the owner’s manual for confirmation that you’re using appropriate battery for your vehicle.
Next, press the small silver button on the back of your Subaru key fob to let go and pull out a metal key. Place the screwdriver’s tip into the slot to open the gap between the front and back of the key fob’s body. This gives access to its internal components. Take off the key made of metal, and then use the screwdriver in order to separate the housing that houses the control module. This housing contains the battery.
Once the housing is removed, locate the flat round battery inside. You should be able to be able to see it easily, since the battery is surrounded by tiny tabs that hold it in place. Replace the old battery with the new one. Make sure that the number is facing upwards. Reassemble the key fob, and test it for function. In most instances, your car should sound a chime, and the locks should be activated when you press the lock button on the key fob.
Why visit a Dealership to get a new key fob?
subaru replacement key key fobs make it simple to lock and start your vehicle remotely. But like any electronic device they can break or become obsolete. Fortunately, there are several options for replacing subaru key your subaru find my keys key fob in Bartow and Lake Wales.
The first step is to determine the type of fob that you have. Older models with a physical key inside are more of a teardrop form, while the newer models feature a large rectangle. Open the case and expose the transmitter circuitboard and battery. Replace the old battery with an alternative. Make sure you use the correct polarity and location otherwise your car will not start.
Dealerships usually offer the most extensive programmers for your particular vehicle model. They may also provide an additional security option. They might charge more since they have higher operating costs.
You might also find a replacement at an auto parts shop or online. Consumer Reports found that some off-brand remotes don’t work with the car’s system. A lot of online retailers who sell replacement remotes also require proof of ownership in order to program the new remote. You can ask your local mechanic or dealer to do it for you. However, this will cost you more.
Why would you go to a Hardware Store for a Key Fob Replacement?
The key fob permits you to start your car and unlock it without having to use a physical key. Subaru’s key fobs have features that make driving a car a lot easier and more enjoyable. They can lock and unlock the doors as well as start and unblock the engine, open and open the gas cap, as well as turn on the light.
The majority of newer vehicles have a fob which must be programmed prior to you can use it. The manufacturer provides these devices with unique codes that only dealerships and locksmiths have access to.
If you are unable to locate or repair your fob, it is best to go to a retailer. They have the software to reprogram blank fobs so that they work with a specific model. They can cut the new key and then insert it into the fob for you.
Some online retailers offer blank key fobs that you can program. These devices aren’t as reliable as those purchased directly from the dealer.
The first step is to write down the 8-digit transmitter’s code you will find on the top of your driver’s side door sill. Once you have the first digit down take your vehicle and hit your lock button the number of times it takes to match that number. Repeat this process for the remaining number. After entering the final digit, take off the ignition key and listen to the dash for a chime that indicates that the system has been properly programmed.
Why should you visit a Subaru Dealership for a Key Fob Replacement?
While a simple key with an attached key cylinder to the car fender remains the norm, many motorists nowadays opt for an electronic key fob that locks, unlocks and in some cases even starts their vehicles. These devices transmit a signal to the vehicle through multiple antennae. Then, it uses a transponder chip to verify that the driver is a valid user. Consumer Reports says that this is the reason drivers of the latest models are required to visit a dealer to replace their fobs.
It may seem like an inconvenience, but it’s much better to visit a dealer. This will ensure you receive a genuine replacement key fob, and that your car has been programmed to accept the key fob. The cost of the duplicate or Replacement car keys cost fob can be covered under the warranty of your car which will save you money over time.
Take a look inside the inside of your Subaru key fob to locate a small gap in the gap between the front and the back (instructions on opening the fob will be found in the owner’s manual). Once you’ve found this spot and you’ve found it, use a flathead break the fob. Then, remove the old battery and place a 2025 battery in its place. Then, put the fob back together.